Perfect User Experience 0.2ohm to 5.0ohm resistance Adjustable 5W to 50W M50 box mod vape

Model Number: M50 50W mod-#2275 Brand Name: MLIFE Key Specifications/Special Features: DescriptionMLIFE - 50 adapts 0.69 "OLED screen, and display resistance, power, low battery, voltage, etc. It is easy to operate and with overtime protection, short circuit protection, over temperature protection and other functions, automatically adjusts the output voltage, and supports the constant power output. The power can be ranged from 5 to 50 watts, andthe minimum adjusting step size is 0.1W.Operating instruction1 Power On/Off：Continuously click the power button 5 times within 2 seconds, the screen will display resistance ,power and voltage after 2 seconds. It enters into sleep mode within 15 seconds without any operation. Press any key to enter into normal working situation and the screen lights. Continuously click the power button 5 times within 2 seconds to power off.2 Atomizer detection: System will automatically detect the atomizer after properly connecting the atomizer, and will scale the voltage and power according to the resistance. Only under 0.2-5.0 ohm, the device can work normally.3 Smoking operation: keep pressing the power button under the working situation to smoke. Press The function key “+”“-”to adjust the power from 5 to 50 W.
4 Lock /unlock : Simultaneously press the power button and“+” key to lock the device . Simultaneously press the power button and “_”key to unlock the device.

5 Power and voltage switch: Under normal working state, continuously click the power button 3 times in 2 seconds to switch power and voltage display.

6 Charging: If the battery voltage <3.4v , system will stop working, and the screen will display low battery and need to be re-charged . Charging symbol displays the charging rate, and will enter into standby mode when fully charged.


Protection & Alarm

1 Overtime protection : If inhale more than 10 seconds each time, the screen will display overtime after scroll 1 to 10 seconds. Electronic cigarette forces the MOS to close, and the screen go back to normal status and display resistance ,power, and voltage.

2 Short circuit protection : The screen displays “Short Circuit“ when the atomizer short circuitduringthe workingprocess , the system stops working , and will not detect the load resistance any more.Press the power key go back to normal working status after replacing the atomizer .

3 When the main board temperature exceeds 80 ℃, the system stops working, the screen displays “High temperature”and prompts the device can not work properly. The device will be back to normal status after the temperature is blow 75℃ .

4 Atomizer resistance too small / too high